1.5T Electric Winch With Cable Winding System And Lebus Grooved Drum
Product introduce
Usage: Marine winch, Oil Well
Applicable Industries: Energy & Mining
Video outgoing-inspection: Provided
Machinery Test Report: Provided
Marketing Type: New Product
Warranty of core components: 1 Year
Core Components: Engine, Motor
Condition: New
Power Type: Electric
Place of Origin: China
Brand Name: LBS
Voltage: Three phase. 380V
Warranty: 1 Year
Rope Capacity: 30 meters
Product Category: as per customer's requirement
Engine: Electric
Meterial: Steel
After-sales Service Provided: Online support, Video technical support, Site installation, commissioning and training, Site maintenance and repair service
Certification: CCS
parameters
| Other name | 1.5T Electric Winch With Cable Winding System And Lebus Grooved Drum |
| Power | Eletric |
| Rope speed | 7m/min |
| Rope diameter | 6-8mm |
| Sling type | wire rope |
| Direction rotation | Left or right |
| Application | Retracting And Lowering Cables |
| Parameter | Can be designed |
| Protection class | IP65 |
| Motor | AC380V/50Hz |
| Drum width | 250mm |
Structure form
The winch converts the electric energy into mechanical energy through the motor, that is, the rotor of the motor rotates the output, through the triangle belt, shaft, gear, and then drives the drum to rotate after deceleration. The reel winds the wire rope and passes through the pulley block to make the crane hook lift or drop the load, change the mechanical energy into mechanical work, and complete the vertical transport loading and unloading work of the load.
Installation of electric winch
The most important note here is the state of the rope drum, which must be used to ensure that the lasso is evenly wound before the process begins. The installation process is as follows:
1. Plug in the remote control. Connect the distal end of the first plug-in winch.
2. Do not let the remote connection hang. If you are a driver, operate the remote control from the driver's seat and then make additional connections around the side mirrors of the car to make co-working easier.
3. Open the noose, use the remote control to open the noose a bit, and install it on the side of the electric winch.
Turn on the clutch. Please note that we have to open the hook later to open the clutch.
5. Hold the rope hook hand. Grabbing the hook with one hand pulls the rope out of the roller, so no matter how long the rope has been twisted, it doesn't reach the hook.
6. Pull the rope on the pivot and lock the clutch.
So the electric winch is installed.
Introduction to pulling winch
The pulling winch consists of several parts, which are connected in series by wire rope. The working principle is to drive the whole system by the friction between the friction wheel and the wire rope, and the friction wheel is connected with the drive device. Generally, the width of the winch is within 1.5 m, which ensures the compactness and reliability of the entire transport unit. The traction winch is provided with tensioning device.
Company equipment
Our factory has more than 2000 sets of advanced equipment such as casting, forging, gear processing, sheet metal stamping, riveting, heat treatment and mechanical operation. In recent years, the Germany CW1000 machining center, CNC four axis, five axis linkage machining center, CNC punch, large CNC hobbing gear grinding machine, large CNC floor boring and milling machine, Vacuum electron beam welding, CNC welding robot and 80 roll machine and other advanced processing equipment.
Product Tags:
|
|
1.5t Electric Rope Winch With Cable Winding System And Lebus Grooved Drum Images
|
